Cooking with cast iron
-
@Jay-Fleck Yeah then it probably was not your meat or other ingredients. I’d season the cast iron really well for future use but I don’t think there will be anything to be done with the soup already made. Flaxseed oil has become more popular recently to cure cast iron but I found it really hard to work with, seemed to gum up more often but maybe I was using too much? Vegetable oil is what I think gives me the best results.
-
Joe Hell Living in the pacific northwest you get all those cool trendy things! We get corn and flatness, hooray! Just kidding I love Kansas but I have never heard of beeswax for curing. Is it just like using a veggie oil or do you cook it on at different temps?
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
Joe Hell Living in the pacific northwest you get all those cool trendy things! We get corn and flatness, hooray! Just kidding I love Kansas but I have never heard of beeswax for curing. Is it just like using a veggie oil or do you cook it on at different temps?
Jonathon when I bought my made-in carbon skillet I purchased the the seasoning wax they offered. It seems to work really well. After each use I clean the pan with a scrubber pad and hot water. I will then crank the heat on the pan and add a splash of avocado oil because it has a high smoking point and spread it around the pan with a paper towel and let cool
-
I have had really good results using peanut oil. As noted, you most likely lost the ‘seasoning’ of your kettle with the acidic ingredients so, you need to rebuild the seasoning.
Normally, I’d cook some breakfast sausage or bacon but, with a huge kettle, I’d get it hot enough to make water drops ‘dance’ and mop it with peanut oil and its high smoke point. Do this 3 or 4 times after each coating ‘bakes’ in. If you wipe the kettle down after cleanup when you reheat for the next batch, it will help with the seasoning issue assuming the kettle stays clean and the oil itself doesn’t go rancid. The best bet is to wash and heat it up good and mop a new layer of peanut oil on.
-
@Jay-Fleck Yeah then it probably was not your meat or other ingredients. I’d season the cast iron really well for future use but I don’t think there will be anything to be done with the soup already made. Flaxseed oil has become more popular recently to cure cast iron but I found it really hard to work with, seemed to gum up more often but maybe I was using too much? Vegetable oil is what I think gives me the best results.
Jonathon Peanut All
-
I cook 99% of my food in cast iron, and have never noticed an iron taste. Like you mentioned it msy just need reasoned, which should help as it will in theory create a barrier between your food and the cast iron. As long as the cast iron is well seasoned acidic foods shouldn’t be a problem.
Tex_77 Ditto. What have you been washing that pot with? May have scrubbed the seasoning out & got some taste into it if you are using soup or anything. We use just very hot water & sometimes just wipe them clean, depending on what has been cooked that time. I seasoned our about 40 some odd years ago & never missed a beat since. Use pots, (little & big), skillets, just about you name it.
-
Jonathon when I bought my made-in carbon skillet I purchased the the seasoning wax they offered. It seems to work really well. After each use I clean the pan with a scrubber pad and hot water. I will then crank the heat on the pan and add a splash of avocado oil because it has a high smoking point and spread it around the pan with a paper towel and let cool
Joe Hell 99% of the time I heat up the cast iron, put a good amount of kosher salt in it and use paper towel to rub it clean. Keep on going till all the residue is off the surface. Rinse it with very hot water and dry it. Put it back on the burner to rid the surface of any residual water. Then, hit it with a very small amount of your favorite oil. I store it upside down to allow for any excess to drip out. Keeps it ready for the next use. But, what do I know. I only have 8 different cast iron cooking implements with only one bought new.
-
@Jay-Fleck Just make sure you season it upside down to allow any residual oils to not be burnt into the surface.
-
As long as you use a thin layer of oil, you shouldn’t have any problems with seasoning or cleaning it (wiping it out). Thick oil or even a puddle will ruin the seasoning though so, be sure to pour off any excess oil and wipe it lightly with a paper towel if you apply a bit too much.
-
As long as you use a thin layer of oil, you shouldn’t have any problems with seasoning or cleaning it (wiping it out). Thick oil or even a puddle will ruin the seasoning though so, be sure to pour off any excess oil and wipe it lightly with a paper towel if you apply a bit too much.
sidpost Absolutely! Thanks for the support. Do what works best for you and have fun doing it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
