Using Your Grinder To Stuff Sausage
-
Meat Hacks: Using Your Grinder To Stuff Sausage.
Learn about Using Your Grinder To Stuff Sausage with Walton's and Meatgistics. Watch the video, read the guide, and then post your questions or comments below.
Meat Hacks
Meat Hacks: Using Your Grinder To Stuff Sausage.
Most grinders have the ability to do more than just grind meat, you can use some of them to power meat mixers, hook up jerky or patty makers to them and most of them have the ability to stuff sausage into casings. One important note is that this is a feature of these types of grinders, it is not ideal and using an actual sausage stuffer will make the process much easier and faster but we are going to show you the process of using your grinder as a stuffer.The Walton’s #12 Processing Grinder and it comes with everything you need to use it as a stuffer. First is the star stuffing adapter, this is going to take the place of a plate and knife and it’s main job is to prevent the auger from riding on the bottom of the throat which would damage both the auger and the head assembly.
Then we have 4 different sized stuffing horns to choose from. We have 20, 30 and 40mm stuffing horns that are tapered down to make stuffing easier, the issue with that is that it means the smallest casing we can get on the smallest of these three horns is the 32mm casing and only a small amount. The smaller horn and casing you use the longer it is going to take to stuff your casings, so doing something like a summer sausage casing is going to be easier than making a bratwurst.
For our purposes today we are choosing the 20mm stuffing horn and a 32mm casing. The collagen is packed down so while we are only able to get a few inches of the casing onto the horn it will translate into a few feet of finished product at a time.
We are going to lock the stuffing horn into the stuffing f****e, to do so you line up the three slot on the f****e with the 3 knobs on the horn and push it into place. Then we are going to put our star stuffing adapter onto the stud where the plate and knife would normally go and finally we will put our locking ring over the stuffing horn to keep it in place.
I have already mixed my seasoning in with my meat, and for anyone wondering it is a brand new one we are carrying, it is Excalibur’s Chocolate Chili Flavored Bratwurst that I have been excited to try for a while now.
So we have everything all set up, we turn our grinder on, push down the meat through the hopper and as you can see it will come out the stuffing horn and into the casing. It is much slower than if we were using a sausage stuffer but it does work. I had six pounds of ground pork and it took me xx minutes.
So while a Sausage Stuffer certainly is a lot easier to use and we would recommend it you can stuff off most grinders, just make sure you purchase one that supports this feature and use the correct stuffing horn.
Subscribe to WaltonsTV
Make sure you subscribe to WaltonsTV and remember to tap the bell next to the subscribed button to get notified about all new videos, plus like and comment on this video, and visit waltonsinc.com and meatgistics.com to find Everything But The Meat!
Subscribe to Meatgistics
Easily subscribe to any category or topic on the Meatgistics community site by clicking the green “Subscribe” button to get an email each time a new post is made!
Shop waltonsinc.com for Walton’s #32 Grinders
Shop waltonsinc.com for Natural Hog Casings
Subscribe to WaltonsTV on YouTube
Camp Chef Woodwind
Walton's 50 lb Meat Mixer
-
Jon
I have to say I was skeptical about stuffing off the grinder but it does work well. We do too much volume to use it often but we do when making test batches.Parksider Agreed, if you are doing test batches it will work, it’s not my favorite thing to do as it takes longer but it absolutely does work. What sized grinder are you stuffing off of?
-
I use my stuffer with a homemaid remote with motor to do my snack stks works great when doing 50# and 100# batches. when I do summer sausage 2# stks and bigger I use my grinder its big with 4’’ plate.go’s real fast.just put everything in the frezzer for a while.plate auger head horn works everytime.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
