Sous Vide questions
-
I found one at a Target for $100. I used it this weekend and the results were great. I brought my snack sticks up to about 135 then put them in the sous vide heated water (water was at 163) I left them in there for about a 1/2 hr, pulling one and checking it with my fireboard thermometers. When they registered 160 I put them in a cold water bath for 15 minutes. The only thing that I will do different next time is start my sous vide earlier so that the water will be hotter when I put the snack sticks in. I did notice that the sticks seem to taste a bit meater than before but that could be from my not doing it right the first time. I will be learning more the more I do. Thanks y’all!
-
I found one at a Target for $100. I used it this weekend and the results were great. I brought my snack sticks up to about 135 then put them in the sous vide heated water (water was at 163) I left them in there for about a 1/2 hr, pulling one and checking it with my fireboard thermometers. When they registered 160 I put them in a cold water bath for 15 minutes. The only thing that I will do different next time is start my sous vide earlier so that the water will be hotter when I put the snack sticks in. I did notice that the sticks seem to taste a bit meater than before but that could be from my not doing it right the first time. I will be learning more the more I do. Thanks y’all!
Freddie
Great to hear! What vessel are you using for your sous vide? I’d like to try this for my 25lb batches and already have a sous vide. Guessing I’ll just need a big cooler and hope my sous vide unit can heat the amount of water needed. -
https://douglasbaldwin.com/index.html
I’ve posted this in the past, and it is still a good read. It explains the science behind SV The book is a waste but the site has everything about how SV works. Scroll down to the table of contents. You have to NOT use your normal meat processing skills. Example: i just SV’d 2 pork butts 7 & 10lbs. Temp, 145* 48hrs. Came out perfect. Chunky not pulled, and the taste was fantastic. Now i’ve over simplified, but that’s the end game. Could have pulled pork for 60hrs, or sliced 143* for 48hrs. Good luck… The more you know, the luckier you get
-
Freddie
Great to hear! What vessel are you using for your sous vide? I’d like to try this for my 25lb batches and already have a sous vide. Guessing I’ll just need a big cooler and hope my sous vide unit can heat the amount of water needed.Jamieson22 I bought a plastic tub from the Dollar Store. It worked but I’m keeping an eye out for anything that might be a little bit better.
-
Jamieson22 I bought a plastic tub from the Dollar Store. It worked but I’m keeping an eye out for anything that might be a little bit better.
Freddie I would make sure it was food safe. Look on the bottom and ck the marking. Leaching contaminants on your food is an unpleasant result. All plastics are molded in oil. Some made for food and some utility. Be safe
-
Freddie I would make sure it was food safe. Look on the bottom and ck the marking. Leaching contaminants on your food is an unpleasant result. All plastics are molded in oil. Some made for food and some utility. Be safe
JoeB Another reason I like to bag the meat but my batches are usually no more than 10 lbs.
-
Jamieson22 I bought a plastic tub from the Dollar Store. It worked but I’m keeping an eye out for anything that might be a little bit better.
Freddie
I sort of answered my own question but ordered a Coleman Party Stacker 48-can cooler. I already have two 24-can that I use to hold bbq and ice bath snack sticks. This bigger one should be good for 25lb batches. Will just hole-saw the lid to drop the sous vide in. -
Freddie
I sort of answered my own question but ordered a Coleman Party Stacker 48-can cooler. I already have two 24-can that I use to hold bbq and ice bath snack sticks. This bigger one should be good for 25lb batches. Will just hole-saw the lid to drop the sous vide in.Jamieson22 the party stackers are the best for the money. Drill a hole in the top and go for 48hrs without water loss. Also the tops are inter changeable. Only have to prep one top
-
Tip…. Don’t drill a 2 1/2 whole. Measure. My SV was 2 1/4. Better fit less loss.
-
JoeB I was thinking about getting a party stacker for finishing sausage etc but am concerned about safety of putting meat directly in cooler without bagging it first. Do you know if cooler is food safe plastic?
Ron Grisar the cooler is food safe. Ck the bottom. It will have a code for food safe and recycle ability. I have to say (my opinion) that a vac bag or ziplock are the way to go. Just safer and cleaner. I poached a lot of sausage. Before SV in a pot there was always fat leaks and strings fm natural casings. That said it is your call. Just more cleanup without bags. Also I can use the same water for different cooks without residue. Big cooks like pork butts chicken or ribs need vac bags. No way around that
-
Jamieson22 the party stackers are the best for the money. Drill a hole in the top and go for 48hrs without water loss. Also the tops are inter changeable. Only have to prep one top
JoeB said in Sous Vide questions:
Also the tops are inter changeable. Only have to prep one top
Perfect. Was hoping they were the same size so I could use this larger cooler for holding finished meats when necessary. Sometimes when butts are cheap I’ll load my Pitts & Spitts up and offer to friends/neighbors so cooking 9+ butts at a time isn’t uncommon.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
