Walton's Mixer with other grinders
-
The ID of the LEM hub is 2.125. The 3/4 x 6 spline shaft seems to fit perfectly. Saturday our daughter made a mistake mixing the seasonings on a 25 lb batch and we had to double it and it turned the overfull mixer load fine.
Grandpa butchered 80 hogs the year he was 80. I buy pork butts to make sausage.
-
The ID of the LEM hub is 2.125. The 3/4 x 6 spline shaft seems to fit perfectly. Saturday our daughter made a mistake mixing the seasonings on a 25 lb batch and we had to double it and it turned the overfull mixer load fine.
RandyNight So, is the waltons mixer hub 2"?? Now I see how the Waltons mixer will fit many grinder manufacturers. (this is good!) A 2" mixer hub will fit any grinder hub larger than 2" but obviously not smaller. IE: LEM at 2.125, Cabelas 2.5
seems everyone uses a 3/4" x 6spline shaft to drive it allLooks like Cabelas mixers will only fit Cabelas grinders with both being 2.5" Go figure…
-
The ID of the LEM hub is 2.125. The 3/4 x 6 spline shaft seems to fit perfectly. Saturday our daughter made a mistake mixing the seasonings on a 25 lb batch and we had to double it and it turned the overfull mixer load fine.
RandyNight This speaks volumes as to the quality of the Waltons mixer. I would never do that with my Cabelas unit! I don’t have that much faith in the gears.
-
Walton mixer hub just a bit over 2" but a slip fit
-
My new 50# Waltons mixer fits on my LEM #8. Ran over 200# through it Saturday. My son was thinking he was getting a cheap grinder since I purchased a #32. Sorry
RandyNight You happen to have a picture of the two mated up?
-
Grimpuppy It still set up from our last sausage day
-
-
No go with Grandpa’s #12 Stimson, it has a square shaft!
Grandpa butchered 80 hogs the year he was 80. I buy pork butts to make sausage.
-
No go with Grandpa’s #12 Stimson, it has a square shaft!
RandyNight said in Walton's Mixer with other grinders:
No go with Grandpa’s #12 Stimson, it has a square shaft!
I’ll bet that old beast has heard a few stories over the years!
-
Nice Jeep in the background. CJ model?
-
Nice Jeep in the background. CJ model?
Mike Sample Yep, 78 model. Our 19 yo twins have that for one of their projects. We’ve learned to rebuild the T150 3 speed in it. Not running in quite top shape yet, but has new wheels and tires. Teenage priorities… Sat in the weeds at our son-in-laws for a few years.
Mama and me have a 93 YJ, one of the boys has an 06 TJ for daily driver.
-
RandyNight said in Walton's Mixer with other grinders:
No go with Grandpa’s #12 Stimson, it has a square shaft!
I’ll bet that old beast has heard a few stories over the years!
PapaSop I like all the safety features. They don’t build them like that anymore.
-
No go with Grandpa’s #12 Stimson, it has a square shaft!
RandyNight PapaSop I like all the safety features.
They don’t build them like that anymore. -
RandyNight PapaSop I like all the safety features.
They don’t build them like that anymore.YooperDog said in Walton's Mixer with other grinders:
RandyNight PapaSop I like all the safety features.
They don’t build them like that anymore.I noticed the hand crafted wood stomper. You can’t get your fingers in the auger as long as that stomper blocks the opening.
-
Yep, one of our kid’s friends who is in his 30s is without half an arm because of a grinder when he was about 9 years old, and I heard of another small boy losing an arm several years ago. Stomper stayed in that one and it was never turned on on our sausage day. #32 worked too well!
-
So I’m thinking about getting a Walton’s 50 lber and just want to make sure. These will fit my #22 Weston pro series, correct?
-
RandyNight said in Walton's Mixer with other grinders:
No go with Grandpa’s #12 Stimson, it has a square shaft!
I’ll bet that old beast has heard a few stories over the years!
PapaSop Beast is correct. I think with the head it is a tad over 100 lbs! Has a regular 56 frame style electric motor in it with an oil gearbox.
-
So I’m thinking about getting a Walton’s 50 lber and just want to make sure. These will fit my #22 Weston pro series, correct?
Looks like I answered my own question, and we’ll be good there. Now to decide whether to order now, or wait until a livestream and a discount code…
-
Looks like I answered my own question, and we’ll be good there. Now to decide whether to order now, or wait until a livestream and a discount code…
Midwest_kc
Waiting to place an order myself. Curious to see the new website, and the possibility of an intro code?? Hmm.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
