<![CDATA[Problem with stuffing sticks]]>First time posts so bear with me.

I have an LEM 11 lb. stuffer which has worked well for 15years. My only complaint
is it came with a 5/8” stuffing tube which doesn’t allow me to slide the 21mm casings
on. I have to feed it onto the tube. I had a new piston gasket and purchased the Walton’s
13mm tube. When stuffing sticks the meat blows past the piston gasket. I reached
out to LEM and they were no help. So I thought about purchasing a new stuffer.
I was on the Walton’s web site looking at the 11-pound stuffer and noticed it came with a
13mm tube so I called to speak to a product specialist to see if they had any problems
with the meat blowing by the piston gasket. Unfortunately they do not and suggested
I reach out to the Meatgistics community for answers. So does anyone use this
stuffer or had this problem stuffing stick? I don’t mind purchasing a new stuffer if
it solves the problem. Thanks

]]>https://waltonsdev.nodebb.com/topic/5276/problem-with-stuffing-sticksRSS for NodeThu, 10 Sep 2026 22:36:26 GMTTue, 26 Apr 2022 16:05:34 GMT60<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 23:30:42 GMT]]>Denny O always stainless

]]>https://waltonsdev.nodebb.com/post/76612https://waltonsdev.nodebb.com/post/76612Thu, 28 Apr 2022 23:30:42 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 15:08:03 GMT]]>twilliams Stainless versus plastic?

]]>https://waltonsdev.nodebb.com/post/76569https://waltonsdev.nodebb.com/post/76569Thu, 28 Apr 2022 15:08:03 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 15:00:18 GMT]]>Denny O I’m not sure but I do know the 19mm casing is a struggle to get on my cabelas 12.7mm OD tube. I’m not sure if they are saying my tube is a 12mm or 13mm. I’m assuming a 13mm. With the Walton’s 11lb stuffer tube the 19mm slides right on with ease. So I’m assuming that is a true 12mm OD diameter

]]>https://waltonsdev.nodebb.com/post/76567https://waltonsdev.nodebb.com/post/76567Thu, 28 Apr 2022 15:00:18 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 11:30:41 GMT]]>Ed Paone All I can speak of is the Walton’s 11# stuffer and it has stuffed everything from 19mm collagen to 22mm sheep casings to 5" fiber and has never failed to produce outstanding results.

]]>https://waltonsdev.nodebb.com/post/76543https://waltonsdev.nodebb.com/post/76543Thu, 28 Apr 2022 11:30:41 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 04:07:04 GMT]]>Got a question while we are on the subject, (sorry for a slight derail to the OP.)
When we speak of the diameter of the stuffing tube, Is it the OD or the ID in mm or inches?

I ask because the casings are in ID I believe for the casing, but when you get down to a 17mm tube I thought it was in ID. SO are we using dimensions in ID or OD for which, the tube or the casing???

I’m just looking for a clarification, not my last rodeo and I’m still steering my last red meat into the corral and down the shoot!!
YE HA!! Get along little doggie!!

Is it always ID for the Casing and OD for the tube?

]]>https://waltonsdev.nodebb.com/post/76521https://waltonsdev.nodebb.com/post/76521Thu, 28 Apr 2022 04:07:04 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 03:53:36 GMT]]>GWG8541 said in Problem with stuffing sticks:

Ed Paone I did 10 pounds of deer sticks with the Walton’s 11lb stuffer recently and had no issues with blowby.
20220403_230134.jpg
20220403_230242.jpg 20220403_230300.jpg

Oh you brownie pointer you! LOL!

]]>https://waltonsdev.nodebb.com/post/76520https://waltonsdev.nodebb.com/post/76520Thu, 28 Apr 2022 03:53:36 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 03:49:04 GMT]]>PapaSop said in Problem with stuffing sticks:

ND Mike said in Problem with stuffing sticks:

Ed Paone I can tell you that the 11 lb from Walton’s is an amazing stuffer. I’d like to know how many lbs of sticks Jonathon has made with an 11 lb stuffer.

Not sure Jonathon can count that high. 😂😉

Nice shot PoppaSop! Bullseye!!

]]>https://waltonsdev.nodebb.com/post/76519https://waltonsdev.nodebb.com/post/76519Thu, 28 Apr 2022 03:49:04 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 03:17:25 GMT]]>Ed Paone I use the lem 11lb. stuffer and make a lot of smack sticks with a 19mm stuffing tube and hope this will help.
1: Make sure the gasket in put on the right way.
2: How much water are you adding to your mix? I use 2 oz. per LB. of meat.
I have adapted the stuffing tubes that work an a Kitchenaid mixer and they work very well for both 19mm casings and 21 mm casings like for brats.

]]>https://waltonsdev.nodebb.com/post/76513https://waltonsdev.nodebb.com/post/76513Thu, 28 Apr 2022 03:17:25 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 02:37:13 GMT]]>kyle yes sir. I smoke them, put them in the sous vide, then after the ice bath, back on the racks to dry overnight in the fridge.

]]>https://waltonsdev.nodebb.com/post/76509https://waltonsdev.nodebb.com/post/76509Thu, 28 Apr 2022 02:37:13 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 02:30:40 GMT]]>GWG8541 I always lay mine on the smoker rack but you got me thinking I could double the space in my smoker doing that. Plus for drying them that would work better than having cookie sheets spread all over the kitchen. Thanks

]]>https://waltonsdev.nodebb.com/post/76508https://waltonsdev.nodebb.com/post/76508Thu, 28 Apr 2022 02:30:40 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 02:20:49 GMT]]>bocephus thanks

]]>https://waltonsdev.nodebb.com/post/76506https://waltonsdev.nodebb.com/post/76506Thu, 28 Apr 2022 02:20:49 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 02:20:14 GMT]]>cdavis thanks

]]>https://waltonsdev.nodebb.com/post/76505https://waltonsdev.nodebb.com/post/76505Thu, 28 Apr 2022 02:20:14 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 02:19:44 GMT]]>samspade thanks

]]>https://waltonsdev.nodebb.com/post/76504https://waltonsdev.nodebb.com/post/76504Thu, 28 Apr 2022 02:19:44 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 02:19:34 GMT]]>kyle I have to smoke them on the jerky racks. I do not have a vertical smoker or hanging space.

]]>https://waltonsdev.nodebb.com/post/76503https://waltonsdev.nodebb.com/post/76503Thu, 28 Apr 2022 02:19:34 GMT<![CDATA[Reply to Problem with stuffing sticks on Thu, 28 Apr 2022 01:12:38 GMT]]>GWG8541 nice looking sticks. Do you smoke them on the jerkey racks or do you just use them for drying. I have some of those and have never used them. Might have to dig them out

]]>https://waltonsdev.nodebb.com/post/76483https://waltonsdev.nodebb.com/post/76483Thu, 28 Apr 2022 01:12:38 GMT<![CDATA[Reply to Problem with stuffing sticks on Wed, 27 Apr 2022 19:36:22 GMT]]>GWG8541 those are mighty fine sticks.

]]>https://waltonsdev.nodebb.com/post/76458https://waltonsdev.nodebb.com/post/76458Wed, 27 Apr 2022 19:36:22 GMT<![CDATA[Reply to Problem with stuffing sticks on Wed, 27 Apr 2022 14:29:21 GMT]]>GWG8541 Nice looking sticks, on my to do list before summer vacation.

]]>https://waltonsdev.nodebb.com/post/76420https://waltonsdev.nodebb.com/post/76420Wed, 27 Apr 2022 14:29:21 GMT<![CDATA[Reply to Problem with stuffing sticks on Wed, 27 Apr 2022 13:20:53 GMT]]>GWG8541 great looking sticks 👌

]]>https://waltonsdev.nodebb.com/post/76411https://waltonsdev.nodebb.com/post/76411Wed, 27 Apr 2022 13:20:53 GMT<![CDATA[Reply to Problem with stuffing sticks on Wed, 27 Apr 2022 13:00:51 GMT]]>Sticks look awesome.

]]>https://waltonsdev.nodebb.com/post/76408https://waltonsdev.nodebb.com/post/76408Wed, 27 Apr 2022 13:00:51 GMT<![CDATA[Reply to Problem with stuffing sticks on Wed, 27 Apr 2022 02:00:16 GMT]]>Ed Paone we just did 50# of snack sticks last month, no issues at all.

]]>https://waltonsdev.nodebb.com/post/76360https://waltonsdev.nodebb.com/post/76360Wed, 27 Apr 2022 02:00:16 GMT<![CDATA[Reply to Problem with stuffing sticks on Wed, 27 Apr 2022 01:43:54 GMT]]>Ed Paone I did 10 pounds of deer sticks with the Walton’s 11lb stuffer recently and had no issues with blowby.
20220403_230134.jpg
20220403_230242.jpg 20220403_230300.jpg

]]>https://waltonsdev.nodebb.com/post/76359https://waltonsdev.nodebb.com/post/76359Wed, 27 Apr 2022 01:43:54 GMT<![CDATA[Reply to Problem with stuffing sticks on Tue, 26 Apr 2022 22:57:42 GMT]]>Ed Paone would you like to talk some specifics? First I want to ask is your LEM a dual gear stuffer? Next is on your process, you have specified on learning the correct position of the piston seal so that should help. As far as your batch what does your meat block consist of, such as proteins percentages, weight and distilled water amounts? Welcome to the community, the fun has only begun for you.

]]>https://waltonsdev.nodebb.com/post/76352https://waltonsdev.nodebb.com/post/76352Tue, 26 Apr 2022 22:57:42 GMT<![CDATA[Reply to Problem with stuffing sticks on Tue, 26 Apr 2022 20:50:36 GMT]]>Absolutely love my 11lb stuffer. Has never given a problem on any product down to 19 casings

]]>https://waltonsdev.nodebb.com/post/76343https://waltonsdev.nodebb.com/post/76343Tue, 26 Apr 2022 20:50:36 GMT<![CDATA[Reply to Problem with stuffing sticks on Tue, 26 Apr 2022 19:33:25 GMT]]>I can vouch that the Walton 11 lb. stuffer does great with snack sticks. I did a lot of research on different stuffers and decided on the 11 lb. Walton stuffer because of positive ratings on it for snack sticks.

]]>https://waltonsdev.nodebb.com/post/76338https://waltonsdev.nodebb.com/post/76338Tue, 26 Apr 2022 19:33:25 GMT