<![CDATA[PK100 cover]]>Hey all!! My PK100 should be arriving in a couple of weeks. Has anyone found a quality cover that fits it? Mine will be kept in the garage but still want to keep it covered.
Thanks!

]]>https://waltonsdev.nodebb.com/topic/4681/pk100-coverRSS for NodeThu, 10 Sep 2026 22:40:56 GMTTue, 30 Nov 2021 22:35:41 GMT60<![CDATA[Reply to PK100 cover on Thu, 02 Dec 2021 00:52:49 GMT]]>Bgoofy1 It was amazon. Just add that in or search for that product number at end of link.

But it is the “SunPatio Smoker Cover 40 inch, Heavy Duty Waterproof Electric Smoker Grill Covers, UV and Fade Resistant, Square Gas BBQ Smoker Cover for New Model Smokers Masterbuilt, Char-Broil and More”
28"x22"x39" option.

]]>https://waltonsdev.nodebb.com/post/59343https://waltonsdev.nodebb.com/post/59343Thu, 02 Dec 2021 00:52:49 GMT<![CDATA[Reply to PK100 cover on Thu, 02 Dec 2021 00:51:34 GMT]]>Mcjagger do these measurements leave the 1-2” leeway the company recommends?
Thx

]]>https://waltonsdev.nodebb.com/post/59342https://waltonsdev.nodebb.com/post/59342Thu, 02 Dec 2021 00:51:34 GMT<![CDATA[Reply to PK100 cover on Thu, 02 Dec 2021 00:43:34 GMT]]>Jamieson22 looks like the link was removed?

]]>https://waltonsdev.nodebb.com/post/59336https://waltonsdev.nodebb.com/post/59336Thu, 02 Dec 2021 00:43:34 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 22:15:35 GMT]]>I bought this. $19 when I got it, now is $23.

It is too big but the velcro at bottom locks it on tight. Only used a few times as decided to just roll it into garage when not using. Huge Plus: Garage now smells wonderful.

https://www.amazon.com/gp/product/B07PCQ2J8G/

]]>https://waltonsdev.nodebb.com/post/59256https://waltonsdev.nodebb.com/post/59256Wed, 01 Dec 2021 22:15:35 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 20:06:22 GMT]]>I bought a universal 29"grill cover at Home Depot that has velcro on the sides. So far has worked well even in wind storms. We currently have on our cement patio but will be moving inside basement for winter. I worry about freezing temps damaging the electronic controls.

]]>https://waltonsdev.nodebb.com/post/59236https://waltonsdev.nodebb.com/post/59236Wed, 01 Dec 2021 20:06:22 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 19:21:46 GMT]]>Just a thought… Depending on where you live keeping it in the garage my cause your unit to rust due to high moister levels. Be carful…

]]>https://waltonsdev.nodebb.com/post/59232https://waltonsdev.nodebb.com/post/59232Wed, 01 Dec 2021 19:21:46 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 18:09:40 GMT]]>I used the company that TexLaw suggested as well as the the suggested measurements that he indicated he would use if he were to order it again. works great !!!

]]>https://waltonsdev.nodebb.com/post/59228https://waltonsdev.nodebb.com/post/59228Wed, 01 Dec 2021 18:09:40 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 18:07:22 GMT]]>TexLaw TEAM ORANGE PK100 SOUS VIDE POWER USER Jul 27, 2020, 3:26 PM

I wanted to follow up on this. I did order a cover from https://www.coversandall.com/. With the COVID situation, it took three months to get here (I think the original estimated time was about 3 weeks), but it was well worth the wait. I like this cover. It seems like very good quality–very heavy duty. I did get the “Cover Tuff” fabric, which is the most expensive, but I got it with the intention that my PK 100 will live outside in the elements. I like to buy things only once, if possible, and I don’t expect to have to replace this cover anytime soon at all. It ain’t much to look at, but I didn’t buy it to look at it.

20200727_150615.jpg

For everyone’s reference, these are the measurements I used:

Height : 48"
Width : 22.5"
Depth : 21"
If I were to get it again, I would probably put the height at 46", as I neglected to figure in that it would hang down from the control panel. It’s so long that the cover gets under the castors when I roll it around. That’s no big deal because I can just hitch it up a little when I move the cooker around, but it’s also a waste of fabric and money. I wouldn’t change the width or depth, though. If it were any tighter, it would be too difficult to put on, but any looser would be a waste of fabric and money.

Other than the fabric, I didn’t add any upgrades. The drawstrap tiedowns sounded good enough for me, and I’m happy I went with those. They look to be good quality, as well and include clips, so that you only have to adjust the once.

The total cost was $62.01, including shipping and the “welcome” discount they were running at the time.

Great product!

]]>https://waltonsdev.nodebb.com/post/59227https://waltonsdev.nodebb.com/post/59227Wed, 01 Dec 2021 18:07:22 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 16:54:42 GMT]]>Bob Stehlik That may be viable if they are long enough.

]]>https://waltonsdev.nodebb.com/post/59218https://waltonsdev.nodebb.com/post/59218Wed, 01 Dec 2021 16:54:42 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 15:09:00 GMT]]>I don’t have a PK100, wish I did, but wouldn’t a swamp cooler or air conditioner cover work? They come in many different sizes and materials.

]]>https://waltonsdev.nodebb.com/post/59209https://waltonsdev.nodebb.com/post/59209Wed, 01 Dec 2021 15:09:00 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 14:37:26 GMT]]>I have had covers and such made at awning and boat cover shops.

]]>https://waltonsdev.nodebb.com/post/59204https://waltonsdev.nodebb.com/post/59204Wed, 01 Dec 2021 14:37:26 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 13:24:56 GMT]]>craigrice thank you

]]>https://waltonsdev.nodebb.com/post/59186https://waltonsdev.nodebb.com/post/59186Wed, 01 Dec 2021 13:24:56 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 13:16:04 GMT]]>any place that makes truck tarps can also do the job

]]>https://waltonsdev.nodebb.com/post/59184https://waltonsdev.nodebb.com/post/59184Wed, 01 Dec 2021 13:16:04 GMT<![CDATA[Reply to PK100 cover on Wed, 01 Dec 2021 00:56:28 GMT]]>Bgoofy1 Maybe look at a canvas shop see if they could sew one up, or an upholstery shop I would think they would be able to make one, don’t know what cost would be though.

]]>https://waltonsdev.nodebb.com/post/59139https://waltonsdev.nodebb.com/post/59139Wed, 01 Dec 2021 00:56:28 GMT<![CDATA[Reply to PK100 cover on Tue, 30 Nov 2021 23:52:39 GMT]]>Randie N I will let you know if I find anything. I’ll keep an eye out in case anyone else does as well.

]]>https://waltonsdev.nodebb.com/post/59120https://waltonsdev.nodebb.com/post/59120Tue, 30 Nov 2021 23:52:39 GMT<![CDATA[Reply to PK100 cover on Tue, 30 Nov 2021 23:50:45 GMT]]>Bgoofy1 Randie N there are some folks on the site here who had covers made up at some company. I can’t remember who they were maybe Tex_77 might recall, it was probably close to two years ago. Or you can ping the folks in the PK-100 group.

]]>https://waltonsdev.nodebb.com/post/59119https://waltonsdev.nodebb.com/post/59119Tue, 30 Nov 2021 23:50:45 GMT<![CDATA[Reply to PK100 cover on Tue, 30 Nov 2021 23:42:45 GMT]]>I want to keep coved also. Mine sits on the porch but a couple weeks ago when I picked it up and sat on my porch I found stink bugs inside it because the exhaust vent doesn’t close. It had big gaps that bugs can crawl into. I also tried looking into pvc pipe caps to stick on it. The 3" caps actually measure 3 1/2 " inside and that should work but I am trying to find something that will fit a bit tighter

]]>https://waltonsdev.nodebb.com/post/59117https://waltonsdev.nodebb.com/post/59117Tue, 30 Nov 2021 23:42:45 GMT<![CDATA[Reply to PK100 cover on Tue, 30 Nov 2021 23:38:29 GMT]]>Not yet. Only started looking. Was trying to check and see if any of the masterbuilt cover would work but was difficult finding measurements listed. Checked home depot covers.
Found a site you could custom order one but it was on the expensive side

]]>https://waltonsdev.nodebb.com/post/59116https://waltonsdev.nodebb.com/post/59116Tue, 30 Nov 2021 23:38:29 GMT