<![CDATA[Wet Bulb Temperature and Thermal Processing]]>I was looking at a recipe that had a fairly detailed smoke schedule that included wet bulb temperatures, so that tells me the smoker has some sort of humidity control.

Hope to get some input from the community on the subject and if you have a wet bulb thermometer, where did you get it? Is anyone doing this in their smaller smokers?

As I understand it, it is just a normal thermometer/ temp probe with an absorbent cover than can be kept saturated while it is in the smoker. Seems like it should be fairly easy to make one.

]]>https://waltonsdev.nodebb.com/topic/4160/wet-bulb-temperature-and-thermal-processingRSS for NodeThu, 10 Sep 2026 19:27:19 GMTSun, 15 Aug 2021 12:05:27 GMT60<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Tue, 17 Aug 2021 20:10:12 GMT]]>processhead
Thinking back I believe I used a cotton tie from a hoodie.

]]>https://waltonsdev.nodebb.com/post/44677https://waltonsdev.nodebb.com/post/44677Tue, 17 Aug 2021 20:10:12 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Tue, 17 Aug 2021 02:09:04 GMT]]>Back in my previous life dealing with meteorologists and their explanation of the wet bulb instrument was that it was a cotton covered instrument. This was to take outside weather reading’s, but I can’t see why it would be any different using it inside a room or container.

]]>https://waltonsdev.nodebb.com/post/44560https://waltonsdev.nodebb.com/post/44560Tue, 17 Aug 2021 02:09:04 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Tue, 17 Aug 2021 01:44:39 GMT]]>I read a reference that said the wick just needs to be an absorbent material that will soak the water up out of the container and keep the bulb/probe wet. Cotton would certainly do that.

]]>https://waltonsdev.nodebb.com/post/44557https://waltonsdev.nodebb.com/post/44557Tue, 17 Aug 2021 01:44:39 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 23:17:56 GMT]]>Jonathon The old wetbulb I have seems to be cotton. That is about 45 to 50 years old. Not sure just how different fibers would evarorate water. might not even be an issue.

]]>https://waltonsdev.nodebb.com/post/44537https://waltonsdev.nodebb.com/post/44537Mon, 16 Aug 2021 23:17:56 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 22:16:25 GMT]]>If I remember right, it was just a piece of cotton fabric.

]]>https://waltonsdev.nodebb.com/post/44532https://waltonsdev.nodebb.com/post/44532Mon, 16 Aug 2021 22:16:25 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 22:11:15 GMT]]>Chef Interestingly enough there is almost not information on the item card in our main system. Just that it is 4"x5". Ill do some poking around and see what I can find. I’d have guessed a cotton blend but I will see if I can actually get a real answer.

Edit - I mistakenly said INterestingly enough when that was the least interesting thing ever said in this community!

Also, I asked commercial salesmen and they looked at me oddly and just said cotton. I then did some searching with the vendor and they don’t have anything listed so it is either REALLY proprietary or simple cotton…feels like cotton. I’m out for the night guys, when I start rambling like this it is time to go!

]]>https://waltonsdev.nodebb.com/post/44527https://waltonsdev.nodebb.com/post/44527Mon, 16 Aug 2021 22:11:15 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 21:45:12 GMT]]>Jonathon What is the material mad of? really interested in if the material type makes a difference?

]]>https://waltonsdev.nodebb.com/post/44525https://waltonsdev.nodebb.com/post/44525Mon, 16 Aug 2021 21:45:12 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 21:41:10 GMT]]>We’ve got the waltonsinc.com/smokehouse-wet-socks that work for this purpose. I 've done it with the madgetech thermometers so I can graph it, but really, you can do it with anything. We’ve got some information on it in the post that PapaSop was referencing above.

]]>https://waltonsdev.nodebb.com/post/44521https://waltonsdev.nodebb.com/post/44521Mon, 16 Aug 2021 21:41:10 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 21:12:51 GMT]]>PapaSop Didn’t see the original post till now. Great observation. And I gave my slidrule up in 1974, although I still have the slidrule my dad used to help him in the design of the 1st stage of the Saturn V.

]]>https://waltonsdev.nodebb.com/post/44518https://waltonsdev.nodebb.com/post/44518Mon, 16 Aug 2021 21:12:51 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 20:41:50 GMT]]>processhead said in Wet Bulb Temperature and Thermal Processing:

I was looking at a recipe that had a fairly detailed smoke schedule that included wet bulb temperatures, so that tells me the smoker has some sort of humidity control.

Hope to get some input from the community on the subject and if you have a wet bulb thermometer, where did you get it? Is anyone doing this in their smaller smokers?

As I understand it, it is just a normal thermometer/ temp probe with an absorbent cover than can be kept saturated while it is in the smoker. Seems like it should be fairly easy to make one.

Was experimenting one cold winter day.
https://meatgistics.waltonsinc.com/topic/1099/cured-sausage-205-advanced-thermal-processing/18?_=1629144368586

]]>https://waltonsdev.nodebb.com/post/44514https://waltonsdev.nodebb.com/post/44514Mon, 16 Aug 2021 20:41:50 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 02:25:50 GMT]]>processhead if you can measure the temperature and humidity then there are online calculators that will give you the index, just another possibility.

omnicalculator.com/physics/wet-bulb

]]>https://waltonsdev.nodebb.com/post/44418https://waltonsdev.nodebb.com/post/44418Mon, 16 Aug 2021 02:25:50 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Mon, 16 Aug 2021 00:16:19 GMT]]>processhead It is easy. I have an old one from my lab days. Two thermometers, one with a like tubular wick that went around one of the bulbs. Looks like cotton, but it is an older one. The end of the wick went into a jar of water. There are any number of charts that show the differential of the temperatures so you can tell the relative humidity. Many on the internet.

The one think that I’m not sure about if would the wick material change the rate of evaporation and hence the differential temperatures?

You can also use two thermocouples and it will do the same thing

]]>https://waltonsdev.nodebb.com/post/44390https://waltonsdev.nodebb.com/post/44390Mon, 16 Aug 2021 00:16:19 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Sun, 15 Aug 2021 22:55:57 GMT]]>lamurscrappy said in Wet Bulb Temperature and Thermal Processing:

You can get the wet bulb temperature of your smoker using a wet towel over a thermometer with a cup of water soaking the towel, thats the easy part. Hard part is adding humidity to your smoker, theres tips on here to do that, but without a commercial smoker that smoke schedule you have is going to be VERY hard to do.

I would agree with everything you said. What I am thinking is trying to learn more about humidity measurements, sources, and controls for my smoking.
This is just kind of a baby step in that direction.

]]>https://waltonsdev.nodebb.com/post/44370https://waltonsdev.nodebb.com/post/44370Sun, 15 Aug 2021 22:55:57 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Sun, 15 Aug 2021 22:52:28 GMT]]>You can get the wet bulb temperature of your smoker using a wet towel over a thermometer with a cup of water soaking the towel, thats the easy part. Hard part is adding humidity to your smoker, theres tips on here to do that, but without a commercial smoker that smoke schedule you have is going to be VERY hard to do.

]]>https://waltonsdev.nodebb.com/post/44367https://waltonsdev.nodebb.com/post/44367Sun, 15 Aug 2021 22:52:28 GMT<![CDATA[Reply to Wet Bulb Temperature and Thermal Processing on Sun, 15 Aug 2021 16:36:47 GMT]]>processhead i want to install one in mine, i think i will contact the manufacturer and see whats involved

]]>https://waltonsdev.nodebb.com/post/44339https://waltonsdev.nodebb.com/post/44339Sun, 15 Aug 2021 16:36:47 GMT