<![CDATA[Proper Stuffing Tube size for Sheep Casing?]]>I recently purchased 22/24mm Tubed Sheep Casings from Waltons and had issues with using them. I didn’t have the correct tube size and had to use a meat stick tube which obviously is too small.

What tube size do you recommend for 20/22?

]]>https://waltonsdev.nodebb.com/topic/3971/proper-stuffing-tube-size-for-sheep-casingRSS for NodeFri, 11 Sep 2026 01:48:14 GMTSun, 13 Jun 2021 14:58:10 GMT60<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Fri, 18 Jun 2021 03:43:22 GMT]]>Jonathon Yup! I generally go with the largest stuffed horn I can get away with.

]]>https://waltonsdev.nodebb.com/post/40288https://waltonsdev.nodebb.com/post/40288Fri, 18 Jun 2021 03:43:22 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Thu, 17 Jun 2021 03:37:22 GMT]]>Pivodog What I use is the stuffing tubes that are made for a Kitchen Aid Mixer. They come in a two size set and work well for snack sticks and larger casings like for brats. They are a thin plastic and can be trimmed to fit a smaller diameter opening on smaller stuffers. You just might have to add an O ring behind the tube to get a better seal. Might be worth a try.

]]>https://waltonsdev.nodebb.com/post/40206https://waltonsdev.nodebb.com/post/40206Thu, 17 Jun 2021 03:37:22 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Mon, 14 Jun 2021 19:41:11 GMT]]>Pivodog said in Proper Stuffing Tube size for Sheep Casing?:

TexLaw and with a cold one, right?

Danged Straight!

]]>https://waltonsdev.nodebb.com/post/40014https://waltonsdev.nodebb.com/post/40014Mon, 14 Jun 2021 19:41:11 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Mon, 14 Jun 2021 18:51:07 GMT]]>TexLaw and with a cold one, right?

]]>https://waltonsdev.nodebb.com/post/40007https://waltonsdev.nodebb.com/post/40007Mon, 14 Jun 2021 18:51:07 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Mon, 14 Jun 2021 16:12:37 GMT]]>TexLaw said in Proper Stuffing Tube size for Sheep Casing?:

Pivodog Well, we all know how to fix that! lol

Yeah, time for a new 11 lb stuffer!

]]>https://waltonsdev.nodebb.com/post/39998https://waltonsdev.nodebb.com/post/39998Mon, 14 Jun 2021 16:12:37 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Mon, 14 Jun 2021 14:06:01 GMT]]>Pivodog Well, we all know how to fix that! lol

]]>https://waltonsdev.nodebb.com/post/39989https://waltonsdev.nodebb.com/post/39989Mon, 14 Jun 2021 14:06:01 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Sun, 13 Jun 2021 22:16:08 GMT]]>processhead the hardest part is finding one that fits my little 5lb stuffer!

]]>https://waltonsdev.nodebb.com/post/39963https://waltonsdev.nodebb.com/post/39963Sun, 13 Jun 2021 22:16:08 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Sun, 13 Jun 2021 22:15:04 GMT]]>The problem that I had was the plastic tube ie(zip loc sealing end) cut through the case when I was sliding it off of it. Most likely, the tube size that I have was too large.

]]>https://waltonsdev.nodebb.com/post/39962https://waltonsdev.nodebb.com/post/39962Sun, 13 Jun 2021 22:15:04 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Sun, 13 Jun 2021 20:35:01 GMT]]>Pivodog The sheep and hog casings have a good deal of stretch to them so you could go up a little in size from the 20/22 casing size but I would say 16 mm would be a stretch depending on how much variation/stretch your casings have.

]]>https://waltonsdev.nodebb.com/post/39952https://waltonsdev.nodebb.com/post/39952Sun, 13 Jun 2021 20:35:01 GMT<![CDATA[Reply to Proper Stuffing Tube size for Sheep Casing? on Sun, 13 Jun 2021 18:52:20 GMT]]>Casing-Funnel Chart.jpg

You should be ok with a 13mm tube.
Keep the casings and the tube and moist they should go on ok.

]]>https://waltonsdev.nodebb.com/post/39951https://waltonsdev.nodebb.com/post/39951Sun, 13 Jun 2021 18:52:20 GMT