<![CDATA[Grinder plates for #22 Walton grinder]]>Will the #22 takedown grinder plates work on #22 waltons grinder?

]]>https://waltonsdev.nodebb.com/topic/3840/grinder-plates-for-22-walton-grinderRSS for NodeFri, 11 Sep 2026 00:37:18 GMTMon, 03 May 2021 20:39:55 GMT60<![CDATA[Reply to Grinder plates for #22 Walton grinder on Fri, 14 May 2021 17:23:41 GMT]]>TexLaw said in Grinder plates for #22 Walton grinder:

Jonathon Don’t you expect to have product come out of the gap where the tab is? If so, you’ll have an inconsistent grind.

While there may be a gap at that point on the edge of the plate, the seal between the plate face and the threaded retaining nut is usually a smooth machined surface and makes a pretty good seal. I would be surprised to see meat leak past this area .

]]>https://waltonsdev.nodebb.com/post/37695https://waltonsdev.nodebb.com/post/37695Fri, 14 May 2021 17:23:41 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Fri, 14 May 2021 16:43:01 GMT]]>TexLaw From the picture, I think you are correct.

]]>https://waltonsdev.nodebb.com/post/37690https://waltonsdev.nodebb.com/post/37690Fri, 14 May 2021 16:43:01 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Fri, 14 May 2021 15:13:31 GMT]]>Jonathon Don’t you expect to have product come out of the gap where the tab is? If so, you’ll have an inconsistent grind.

]]>https://waltonsdev.nodebb.com/post/37685https://waltonsdev.nodebb.com/post/37685Fri, 14 May 2021 15:13:31 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Thu, 13 May 2021 14:09:39 GMT]]>If you have an angle grinder, you could carefully grind a notch in a Toledo style plate to fit the alignment pin in a machine designed to take Enterprise style plates. Go slow with the angle grinder so it does not overheat the plate and affect the hardness.

]]>https://waltonsdev.nodebb.com/post/37566https://waltonsdev.nodebb.com/post/37566Thu, 13 May 2021 14:09:39 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Thu, 13 May 2021 12:33:56 GMT]]>Okay, it does fit. The flat side catches the tab at the bottom. Now I haven’t actually used it yet but it looks like it will work. I’ll let you all know if it does once I can use it

20210513_073021.jpg

]]>https://waltonsdev.nodebb.com/post/37562https://waltonsdev.nodebb.com/post/37562Thu, 13 May 2021 12:33:56 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Thu, 13 May 2021 12:24:27 GMT]]>I actually think it will…I’ll be back!

]]>https://waltonsdev.nodebb.com/post/37560https://waltonsdev.nodebb.com/post/37560Thu, 13 May 2021 12:24:27 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Sat, 08 May 2021 12:51:50 GMT]]>jonathan324 thank you, that was helpful

]]>https://waltonsdev.nodebb.com/post/37022https://waltonsdev.nodebb.com/post/37022Sat, 08 May 2021 12:51:50 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Wed, 05 May 2021 14:33:02 GMT]]>They will not. The Toledo plates have a flat edge that won’t allow it to fit in the Walton’s grinder. You would need an Enterprise plate with one or three notches.

]]>https://waltonsdev.nodebb.com/post/36818https://waltonsdev.nodebb.com/post/36818Wed, 05 May 2021 14:33:02 GMT<![CDATA[Reply to Grinder plates for #22 Walton grinder on Mon, 03 May 2021 20:42:37 GMT]]>Toledo not takedown

]]>https://waltonsdev.nodebb.com/post/36699https://waltonsdev.nodebb.com/post/36699Mon, 03 May 2021 20:42:37 GMT