<![CDATA[Meat grinder issues]]>Hi. I’m hoping I can get some help or tips here. I live in Malaysia and make my own sausages here for my family and other expat friends, previously using an LEM hand grinder but recently I upgraded to a 1/2HP electric one, made in Taiwan. Living in Malaysia means I have pretty limited options when it comes to purchasing certain products, most of which I have to import (some of which my bro helps me with as he lives in the US and gets from places like meatgistics, then sends to me… a meat grinder however, was a bit too big and heavy for that). The new grinder I got was recommended to me but surprisingly comes with no user manual (weird) and has a bearing inside the throat which is impossible to keep clean. I’ve attached some photos of the inside of the grinder throat showing the bearing. I’ve only used it about 4 times and have done my best at keeping the bearing clean but when I got it out to use it just now I gave it a smell and it’s not good. The issue is that every time you grind meat, blood/juice gets inside the bearing and you can’t open it to clean it properly, it remains inside. When I started to turn the bearing with my finger just now I could see some greasy stuff coming out of it, stinky and not hygienic. I can’t find anything online about similar grinder set ups in the US so any helpful tips or tricks would be very much appreciated! Cheers!!

![3_1613914390621_C4688C17-7AA5-4A2E-8DE9-36BF11CB81FA.jpeg](Uploading 100%) ![2_1613914390621_C16DEB23-3B56-4914-8203-3858D0B395DD.jpeg](Uploading 100%) ![1_1613914390621_0D458FA2-5174-48A0-8066-7E0484FA83D1.jpeg](Uploading 100%) ![0_1613914390621_FC90609A-3B45-4404-95A0-78DFD3F4DFFE.jpeg](Uploading 100%)
3538bbf2-e9ff-4397-9f8c-6937235434e6-image.jpeg https://cf.shopee.com.my/file/131c0458de0332a5b6b028ce9c1e849e

]]>https://waltonsdev.nodebb.com/topic/3469/meat-grinder-issuesRSS for NodeFri, 11 Sep 2026 06:46:48 GMTSun, 21 Feb 2021 13:44:21 GMT60<![CDATA[Reply to Meat grinder issues on Fri, 19 Mar 2021 08:45:52 GMT]]>I would soak that bearings and the unit in a commercial grade food safe sanitizer. It will penetrate into the housing and remove the bacteria buildup from liquids and make it safe to use again in terms of food safety. We often soak bearings like this and our FDA/USDA/STATE inspectors have approved this under our HACCP and Sanitation Plans.

]]>https://waltonsdev.nodebb.com/post/33250https://waltonsdev.nodebb.com/post/33250Fri, 19 Mar 2021 08:45:52 GMT<![CDATA[Reply to Meat grinder issues on Mon, 08 Mar 2021 23:29:43 GMT]]>Would shipping the grinder head to a machine shop be cost prohibitive? Seems a shame to not get that grinder back in the game.

]]>https://waltonsdev.nodebb.com/post/32677https://waltonsdev.nodebb.com/post/32677Mon, 08 Mar 2021 23:29:43 GMT<![CDATA[Reply to Meat grinder issues on Wed, 24 Feb 2021 04:12:21 GMT]]>kksmokehouse Best of luck either way my friend. I would have thought you might have been able to find a small machine shop somewhere there. Of course Malaysia is fairly large but small and depends where you are located. Glad we could at least give you some help and ideas.

]]>https://waltonsdev.nodebb.com/post/31725https://waltonsdev.nodebb.com/post/31725Wed, 24 Feb 2021 04:12:21 GMT<![CDATA[Reply to Meat grinder issues on Wed, 24 Feb 2021 01:09:06 GMT]]>twilliams and johnsbrewhouse thank you both, really appreciate your help! Its a shame about this grinder because it actually does a really good, fast and efficient job. At the end of the day, I just need it to be more hygienic. I think whatever bearing is in there, good quality food safe or cheap standard (as I think it came with off the shelf), once you add hot water and detergents and give it a scrub, it’s going to start to flush the packed grease out pretty quick and rust. I will either look at getting a custom bronze bush, which seems pretty difficult here, or I will splash and import something (LEM/Walton) from the US. Cheers.

]]>https://waltonsdev.nodebb.com/post/31722https://waltonsdev.nodebb.com/post/31722Wed, 24 Feb 2021 01:09:06 GMT<![CDATA[Reply to Meat grinder issues on Tue, 23 Feb 2021 03:14:07 GMT]]>twilliams My Weston has plastic bushing and washers as well

]]>https://waltonsdev.nodebb.com/post/31657https://waltonsdev.nodebb.com/post/31657Tue, 23 Feb 2021 03:14:07 GMT<![CDATA[Reply to Meat grinder issues on Tue, 23 Feb 2021 03:10:24 GMT]]>kksmokehouse That would be right. You would just have to make sure to add a food grade lube to the shaft each time you assemble it. Most all US grinders use bushings rather than a bearing. They are probably using a bearing due to cost, That bearing probably fit s many applications and it’s only about $3 US retail. I can get them even cheaper as a company and probably even less in bulk.

]]>https://waltonsdev.nodebb.com/post/31656https://waltonsdev.nodebb.com/post/31656Tue, 23 Feb 2021 03:10:24 GMT<![CDATA[Reply to Meat grinder issues on Tue, 23 Feb 2021 03:07:25 GMT]]>kksmokehouse yes you are correct, mine has a hard plastic bushing.20210221_173351.jpg 20210221_173400.jpg

]]>https://waltonsdev.nodebb.com/post/31655https://waltonsdev.nodebb.com/post/31655Tue, 23 Feb 2021 03:07:25 GMT<![CDATA[Reply to Meat grinder issues on Tue, 23 Feb 2021 00:44:29 GMT]]>twilliams just to confirm, this kind of set up (bearing located just behind the auger in the wet part of the grinder) is not common with grinders sold in the US? Even larger commercial models?

]]>https://waltonsdev.nodebb.com/post/31636https://waltonsdev.nodebb.com/post/31636Tue, 23 Feb 2021 00:44:29 GMT<![CDATA[Reply to Meat grinder issues on Tue, 23 Feb 2021 00:38:42 GMT]]>johnsbrewhouse are you saying you think the bearing is possibly not necessary and could just be replaced by a bronze or olite bronze bushing of the same inner and outer diameter/depth? I presume I’d then want to have that pressed in so it provides full support for the auger and allows it spin freely within?

]]>https://waltonsdev.nodebb.com/post/31635https://waltonsdev.nodebb.com/post/31635Tue, 23 Feb 2021 00:38:42 GMT<![CDATA[Reply to Meat grinder issues on Mon, 22 Feb 2021 07:10:53 GMT]]>kksmokehouse That sucks, wish you the best, hope you find a solution

]]>https://waltonsdev.nodebb.com/post/31576https://waltonsdev.nodebb.com/post/31576Mon, 22 Feb 2021 07:10:53 GMT<![CDATA[Reply to Meat grinder issues on Mon, 22 Feb 2021 07:05:06 GMT]]>glen the shop gives a 3 month warranty to cover motor related problems only unfortunately. They don’t seem to think the bearing issue is an issue at all 😏

]]>https://waltonsdev.nodebb.com/post/31575https://waltonsdev.nodebb.com/post/31575Mon, 22 Feb 2021 07:05:06 GMT<![CDATA[Reply to Meat grinder issues on Mon, 22 Feb 2021 06:57:23 GMT]]>glen said in Meat grinder issues:

Is the grinder new? may be a defective bearing

kksmokehouse said in Meat grinder issues:

johnsbrewhouse the grinder is only about a month old. I think the seal on the bearing is either gone already or was defective from the get-go. What I can see is a dark looking, thick grease coming out from between the bearing’s inner ring and black seal. I’ve been told that the bearing is pressed in so I’m going to track down a better quality sealed bearing and have someone with a bearing press replace it… Might be back to the hand grinder while getting this sorted.

I assume there is no warranty solution?

]]>https://waltonsdev.nodebb.com/post/31573https://waltonsdev.nodebb.com/post/31573Mon, 22 Feb 2021 06:57:23 GMT<![CDATA[Reply to Meat grinder issues on Mon, 22 Feb 2021 00:44:16 GMT]]>johnsbrewhouse the grinder is only about a month old. I think the seal on the bearing is either gone already or was defective from the get-go. What I can see is a dark looking, thick grease coming out from between the bearing’s inner ring and black seal. I’ve been told that the bearing is pressed in so I’m going to track down a better quality sealed bearing and have someone with a bearing press replace it… Might be back to the hand grinder while getting this sorted.

]]>https://waltonsdev.nodebb.com/post/31558https://waltonsdev.nodebb.com/post/31558Mon, 22 Feb 2021 00:44:16 GMT<![CDATA[Reply to Meat grinder issues on Mon, 22 Feb 2021 00:37:42 GMT]]>twilliams sorry, struggling to get these photos up. WhatsApp Image 2021-02-22 at 8.31.07 AM.jpeg WhatsApp Image 2021-02-22 at 8.31.06 AM.jpeg

]]>https://waltonsdev.nodebb.com/post/31556https://waltonsdev.nodebb.com/post/31556Mon, 22 Feb 2021 00:37:42 GMT<![CDATA[Reply to Meat grinder issues on Mon, 22 Feb 2021 00:03:08 GMT]]>kksmokehouse sealed bearings are usually pretty good about holding their seal. The automotive industry has been using them for years in wet locations and under light pressure. I would not think there would be a problem in the grinder unless moisture intruded into the bearing. I would hope they were packed with a food grade lubricant as well, which it does not appear to be. That would be my concern as well if the seal were to fail. I really would just continue to use it as is and maybe use some food safe grease between the auger and bearing on every use to create a barrier. Then I would check the bearing after you do your clean up for seal break down and see if the bearing is getting rough from moisture intrusion

]]>https://waltonsdev.nodebb.com/post/31554https://waltonsdev.nodebb.com/post/31554Mon, 22 Feb 2021 00:03:08 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 23:31:10 GMT]]>twilliams mine didn’t come with that large plastic washer/bush. Just a small one that sits between the auger and the bearing as pictured here

![1_1613950239030_3E00CF8E-AEAB-4349-99EA-BAFB7260E763.jpeg](Uploading 100%) ![0_1613950239029_2556D8FD-57DC-4AE5-8F45-1A276B58E5B4.jpeg](Uploading 100%)

]]>https://waltonsdev.nodebb.com/post/31549https://waltonsdev.nodebb.com/post/31549Sun, 21 Feb 2021 23:31:10 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 23:28:03 GMT]]>johnsbrewhouse the bearing number is 620srs which is clearly available online for replacements. I’m no bearing expert but I would’ve thought that even if it’s a sealed bearing, that seal is never going to be very good and I’ll always have contamination issues from one batch to the next unless I change the bearing each time.

]]>https://waltonsdev.nodebb.com/post/31548https://waltonsdev.nodebb.com/post/31548Sun, 21 Feb 2021 23:28:03 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 23:22:37 GMT]]>twilliams the grinder is actually an Orimas TBS-200 but it does look just like the taisin grinder pictured. I’ve seen this same model under a few different brand names here, I think all made in the same factory but just sold by different distributors who put there own badge on it.

]]>https://waltonsdev.nodebb.com/post/31546https://waltonsdev.nodebb.com/post/31546Sun, 21 Feb 2021 23:22:37 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 23:16:39 GMT]]>twilliams facebook.com/doptrading/photos/pcb.105902424518065/105901634518144/ manual for the machine. You can’t buy any part for the grinder housing, it comes as an assembly. I went through a bunch on sites, nobody breaks it down.

]]>https://waltonsdev.nodebb.com/post/31544https://waltonsdev.nodebb.com/post/31544Sun, 21 Feb 2021 23:16:39 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 22:46:02 GMT]]>Austin this is a great example of what you have built here, meat processors from the other side of the world trying to help each other out, pretty freaking great!

]]>https://waltonsdev.nodebb.com/post/31538https://waltonsdev.nodebb.com/post/31538Sun, 21 Feb 2021 22:46:02 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 21:47:29 GMT]]>kksmokehouse Screenshot_20210221-142358_Chrome.jpg Screenshot_20210221-142419_Chrome.jpg Screenshot_20210221-142345_Chrome.jpg Screenshot_20210221-142338_Chrome.jpg

]]>https://waltonsdev.nodebb.com/post/31511https://waltonsdev.nodebb.com/post/31511Sun, 21 Feb 2021 21:47:29 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 21:42:43 GMT]]>kksmokehouse so it looks like your grinder is made just like or is a Tasin TA 102 AL. I have not seen any evidence in replacement parts for a steel sealed ball bearing however did show some plastic ones but i can not find a parts diagram that shows either at the moment. Stay tuned

]]>https://waltonsdev.nodebb.com/post/31510https://waltonsdev.nodebb.com/post/31510Sun, 21 Feb 2021 21:42:43 GMT<![CDATA[Reply to Meat grinder issues on Sun, 21 Feb 2021 17:52:35 GMT]]>Is the grinder new? may be a defective bearing
Johnsbrewhouse bronze bearing idea is good if you can access a machine shop.

]]>https://waltonsdev.nodebb.com/post/31480https://waltonsdev.nodebb.com/post/31480Sun, 21 Feb 2021 17:52:35 GMT