Thermo controlled outlets

Reply to Thermo controlled outlets on Fri, 18 Dec 2020 15:08:55 GMT

woodchuck777 — Fri, 18 Dec 2020 15:08:55 GMT

Auber Industries makes an excellent controller. It can be programmed and the programs can be saved. It will control your heating element as well as the smoke generator. Comes with two temperature probes. One mounts in the cabinet to monitor the cabinet temperature and the other can be put into the meat to monitor internal meat temp. I built a smoker using this and it works great.

Reply to Thermo controlled outlets on Fri, 18 Dec 2020 06:27:15 GMT

AaronSilves — Fri, 18 Dec 2020 06:27:15 GMT

D Halverson kind of looking for both I think. My Masterbuilt isn’t big enough to do a full 25lb batches of summer sausage or snack stix. Have an old warming box/oven that a friend gave me. Was hoping to find something that I can set the temp like my Masterbuilt. I’m thinking I might need to build a cold smoker box on the outside for the smoke like I do with the Masterbuilt.

Reply to Thermo controlled outlets on Thu, 17 Dec 2020 21:59:35 GMT

D Halverson — Thu, 17 Dec 2020 21:59:35 GMT

Are you looking for temperature control or smoke element control? If you’re going for temperature control, look up solid state relays and PID controllers. A little bit of work, but you can hold very accurate temperature.

Reply to Thermo controlled outlets on Thu, 17 Dec 2020 20:40:58 GMT

stacyu — Thu, 17 Dec 2020 20:40:58 GMT

My dad built one from an old electric stove. Take off one of the burners and wires for that burner. Put the burner in the bottom of an old refrigerator and drill a hole to run the control wires to the outside. Put a thermometer through another hole into the refrigerator. You can even put wood chips on the burner in the bottom to get some smoke rolling. After playing with it we put marks by the control so we knew about what the temperature would be. worked great.