<![CDATA[Casings got tough!]]>Does anyone have some insight as to why my country style and summer sausage casings got so tough. Especially my summer sausage… it’s like the casing is welded on. My heat never went over 180 and I increased it in stages! I’ve been smoking sausage for about 10 years and have never had this happen. This is the first time I have added a pan of water in my smoker tho…could this be the issue? Any insight would be appreciated! Thanks.

]]>https://waltonsdev.nodebb.com/topic/1017/casings-got-toughRSS for NodeFri, 11 Sep 2026 01:04:15 GMTTue, 15 Jan 2019 19:12:52 GMT60<![CDATA[Reply to Casings got tough! on Wed, 16 Jan 2019 23:20:55 GMT]]>Kinger no, it shouldnt make a difference, I was responding to this first thing in the morning before running to a class that I am taking at Iowa state so I think I was thinking at the beginning of the response that you cooked to an internal of 178 and then I realized my mistake but never fixed the response! Sorry, once Im back in Wichita, on Friday things will hopefully go back to normal!

]]>https://waltonsdev.nodebb.com/post/3378https://waltonsdev.nodebb.com/post/3378Wed, 16 Jan 2019 23:20:55 GMT<![CDATA[Reply to Casings got tough! on Wed, 16 Jan 2019 14:55:08 GMT]]>Jonathon

Thanks Jonathon! One question tho! You eluded to 178 being high for a temp! Don’t you guys recommend setting the temp at 175 during the final stage to completion to internal temp? Three degrees shouldn’t make that much difference should it??

]]>https://waltonsdev.nodebb.com/post/3373https://waltonsdev.nodebb.com/post/3373Wed, 16 Jan 2019 14:55:08 GMT<![CDATA[Reply to Casings got tough! on Wed, 16 Jan 2019 14:48:36 GMT]]>lamurscrappy

Sounds reasonable. Thanks for your input. Pulling the meat at 152 will make a big difference I bet! Thanks again.

]]>https://waltonsdev.nodebb.com/post/3372https://waltonsdev.nodebb.com/post/3372Wed, 16 Jan 2019 14:48:36 GMT<![CDATA[Reply to Casings got tough! on Wed, 16 Jan 2019 13:08:54 GMT]]>Kinger Thanks for the information. Your process, other than going to 178, is on in my mind. The only thing I do differently is an ice bath for 20 minutes. Showering for 10 minutes, if you are running a cycle and a fan in your smoker can work, but I still think an ice bath would bring it down faster and more. Last time I did thick summer sausage it was down to 110 in 20 minutes, I also tried showering it at 2 minutes on 2 minutes off for 20 minutes and it was only down to 136 (ish) but i did not have a fan running on them.

One more thing you might want to try, if you are stalled towards the end you can finish them up by putting them in a vacuum bag (I have done then hot, right from the smoker, some condensation in the bag but it still gets a good vac) and get some water going at around 165, it should get up to temp in under an hour depending on the thickness.

]]>https://waltonsdev.nodebb.com/post/3371https://waltonsdev.nodebb.com/post/3371Wed, 16 Jan 2019 13:08:54 GMT<![CDATA[Reply to Casings got tough! on Wed, 16 Jan 2019 12:48:18 GMT]]>Kinger two things. In my summer sausage making i rarely go over 170 to finish the sausages. I would personally max it at 170 to finish the sausages. Also all my sausages i pull at 152 degrees. But as i thought your sausages got too hot after pulling them which is your issue. Pulling them at 158 and only running water on them for 10 minutes wont cool them down fast enough and stop them from cooking. You need to get them down to 110 ish degrees as soon as possible and im positive that didnt happen which made them render more fat sticking them to your casing. Next time just so you can see stick a thermometer in your sausage when spraying them and see how long it takes to get to 110. Could be around 30 minutes

]]>https://waltonsdev.nodebb.com/post/3367https://waltonsdev.nodebb.com/post/3367Wed, 16 Jan 2019 12:48:18 GMT<![CDATA[Reply to Casings got tough! on Wed, 16 Jan 2019 02:15:10 GMT]]>lamurscrappy Jonathon yep two different types of sausage but the summer sausage was the toughest. 12 pounds elk and 12 lbs pork butt using Walton’s jalapeño. I soaked the fibrous casings for 45 minutes in hot water. Mixed the meat in my Cabelas mixer run off my grinder for 8 minutes and then mixed an additional minute after I put cheese and fresh jalapeños in. Smoked at 125 for 1, 145 for 1, 155 for 1 hour and 45 minutes and finished off at 178 degrees. Pulled the meat at 158 internal temp. Pulled out logs immediately and ran cold well water over them for about 10 minutes and then hung in my 42 degree garage overnight! Even the cheese sticks to the damn casing?? Never seen anything like it.

]]>https://waltonsdev.nodebb.com/post/3363https://waltonsdev.nodebb.com/post/3363Wed, 16 Jan 2019 02:15:10 GMT<![CDATA[Reply to Casings got tough! on Wed, 16 Jan 2019 00:14:40 GMT]]>Kinger A Couple of quick questions. How long did you soak the casings first and what temp was the water? Like lamurscrappy said it is possible that they werent cooled quickly enough, did you ice bath them? Youve been doing it for years so I am assuming you did. Other than the water (i dont see that as a possible reason, but ive been wrong before!) did you do anything different? What meat block were you using? What is it exactly that you are meaning when you say country style summer sausage?

Giving us the thermal processing information and the adding a pan was good info but let us know the answers to the above questions and we will see what we can figure out!

]]>https://waltonsdev.nodebb.com/post/3361https://waltonsdev.nodebb.com/post/3361Wed, 16 Jan 2019 00:14:40 GMT<![CDATA[Reply to Casings got tough! on Tue, 15 Jan 2019 23:18:49 GMT]]>Kinger it seems your describing two different types of sausages? Country style is usually a breskfast sausage with natural or collagen casings and summer sausage is fibrous casings. Is that what your refering too? My rough guess off the bat on your summer sausage cojld be 1 that it wasnt mixed as well as it should have been so the meat didnt bind fully togeather. But i think the main reason is the internal temp of the sausage got too high. This could be because it wasnt fully cooled down after pulling it out of the smoker. Once you pull it out of the smoker the temperature rises very fast and can over cook your sausage and cause it to stick to the casing very badly. Did you monitor the temperature of the sausage after you pulled it? Also what was the internal temp when you pulled it? On the country style i would need more information on type of casing and how you cooked it.

]]>https://waltonsdev.nodebb.com/post/3358https://waltonsdev.nodebb.com/post/3358Tue, 15 Jan 2019 23:18:49 GMT